Modeled water and energy on land (monthly, 1 deg, VIC)
What it measures. A model's monthly snapshot of water and energy conditions across global land on a 1-degree grid, based on the VIC hydrology model.
How it's made. Generated by running the VIC land-surface model (not a satellite sensor) driven by combined observations and weather data, then averaged to monthly values.
How & where you'd use it. Useful for water-cycle and climate studies, comparing different land models, and supporting hydrology and water-resource research.
What's measured
Coverage & cadence
- Time span2000-01-01 → ongoing
- Measured byVIC-LSM (NOT APPLICABLE)
- Processing levelLevel 4
- Spatial extent-180, -60, 180, 90
- StatusACTIVE
What you can do with it
- Map air pollutants — NO₂, aerosols, ozone
- Track greenhouse gases and Earth's energy budget
- Feed weather and air-quality analysis
Official description
NASA Global Land Data Assimilation System Version 2 (GLDAS-2) has three components: GLDAS-2.0, GLDAS-2.1, and GLDAS-2.2. GLDAS-2.0 is forced entirely with the Princeton meteorological forcing input data and provides a temporally consistent series from 1948 through 2014. GLDAS-2.1 is forced with a combination of model and observation data from 2000 to present. GLDAS-2.2 product suites use data assimilation (DA), whereas the GLDAS-2.0 and GLDAS-2.1 products are "open-loop" (i.e., no data assimilation). The choice of forcing data, as well as DA observation source, variable, and scheme, vary for different GLDAS-2.2 products. GLDAS-2.1 data products are now available in two production streams: one stream is forced with combined forcing data including GPCP version 1.3 (the main production stream), and the other stream is processed without this forcing data (the early production stream). Since the GPCP Version 1.3 data have a 3-4 month latency, the GLDAS-2.1 data products are first created without it, and are designated as Early Products (EPs), with about 1.5 month latency. Once the GPCP Version 1.3 data become available, the GLDAS-2.1 data products are processed in the main production stream and are removed from the Early Products archive. This data product is for GLDAS-2.1 VIC monthly 1.0 degree data from the main production stream. It was generated through temporal averaging of GLDAS-2.1 3-hourly data simulated with the VIC 4.1.2 Land Surface Model in Land Information System (LIS) Version 7. The data product contains 34 land surface fields from January 2000 to present. The GLDAS-2.1 data are archived and distributed in NetCDF format. The GLDAS-2.1 products supersede their corresponding GLDAS-1 products. The GLDAS-2.1 simulation started on January 1, 2000 using the conditions from the GLDAS-2.0 simulation. This simulation was forced with National Oceanic and Atmospheric Administration (NOAA)/Global Data Assimilation System (GDAS) atmospheric analysis fields (Derber et al., 1991), the disaggregated Global Precipitation Climatology Project (GPCP) V1.3 Daily Analysis precipitation fields (Adler et al., 2003; Huffman et al., 2001), and the Air Force Weather Agency's AGRicultural METeorological modeling system (AGRMET) radiation fields. The simulation used with GDAS and GPCP only from 2000 to February 2001, followed by addition of AGRMET for March 1, 2001 onwards. In October 2020, all 3-hourly and monthly GLDAS-2 data were post-processed with the MOD44W MODIS land mask. Previously, some grid boxes over inland water were considered as over land and, thus, had non-missing values. The post-processing corrected this issue and masked out all model output data over inland water; the post-processing did not affect the meteorological forcing variables. More information can be found in the GLDAS-2 README. The MOD44W MODIS land mask is available on the GLDAS Project site. If you had downloaded the GLDAS data prior to November 2020, please download the data again to receive the post-processed data.
Get the data
import earthaccess
earthaccess.login(strategy="netrc") # free Earthdata Login
results = earthaccess.search_data(
short_name="GLDAS_VIC10_M",
version="2.1",
bounding_box=(-122.5, 37.2, -121.8, 37.9), # your area (W,S,E,N)
temporal=("2024-01-01", "2024-12-31"), # your dates
)
files = earthaccess.open(results) # stream straight from GES_DISC Browsing CMR needs no login. Downloading or streaming bytes needs a free Earthdata Login + the earthaccess package. Official links
- Access the data via HTTPS. GET DATA
- Access the data via the OPeNDAP protocol. USE SERVICE API
- README Document VIEW RELATED INFORMATION
- How to read and plot the data. VIEW RELATED INFORMATION
- GES DISC Hydrology Documentation VIEW RELATED INFORMATION
- Use the Earthdata Search to find and retrieve data sets across multiple data centers. GET DATA
- GLDAS_CLM10SUBP_3H Status and Related Data Collections VIEW RELATED INFORMATION
- GLDAS LSM Description VIEW RELATED INFORMATION